Liebherr LTM1040 2.1 KRAAN/CRANE /GRUA/KRAN

LIEBHERR LTM 1040-2.1 UTM 725 – 40 TON ALL-TERRAIN MOBILE CRANE – 35 M TELESCOPIC BOOM – FULL COUNTERWEIGHT – YEAR 2008
LIEBHERR LTM 1040-2.1 UTM 725 – 2-AXLE ALL-TERRAIN CRANE – 40 TON LIFTING CAPACITY – 35 METER TELESCOPIC MAIN BOOM – ORIGINAL FACTORY COLOUR – MICHELIN TYRES – FULL BALLAST
GENERAL VEHICLE INFORMATION
- Manufacturer: Liebherr
- Model: LTM 1040-2.1
- Version: UTM 725
- Year of manufacture: 2008
- Date of first registration: 11 December 2008
- Mileage: 205,700 km
- Upper structure operating hours: 10,350 hours
- Maximum lifting capacity: 40,000 kg
- Number of axles: 2
- Drive and steering configuration: 4×4×4
- Stated unladen weight: 23,800 kg
- Tyres: Michelin 16.00 R25 XGC
- Colour: Original factory colour
- Counterweight: Full counterweight package
- Location: Geurts Trucks BV – Andelst, the Netherlands
DETAILED TECHNICAL DESCRIPTION
This Liebherr LTM 1040-2.1 is a compact and powerful 2-axle all-terrain mobile crane with a maximum lifting capacity of 40 tonnes.

The crane is equipped with a hydraulically telescoping main boom with a maximum length of 35 metres.

Thanks to its compact design, all-wheel drive and all-wheel steering, this Liebherr is particularly suitable for lifting operations on construction sites, industrial premises and locations with restricted manoeuvring space.

Main features and equipment:
- Maximum lifting capacity of 40 tonnes
- 35-metre hydraulic telescopic main boom
- 2-axle all-terrain crane configuration
- 4×4 all-wheel drive
- All-wheel steering
- Full counterweight package
- Hydraulic four-point outrigger system
- Original factory colour
- Michelin 16.00 R25 XGC tyres
- Compact dimensions and excellent manoeuvrability
TELESCOPIC MAIN BOOM – LENGTHS AND DIMENSIONS
The Liebherr LTM 1040-2.1 features a four-section hydraulic telescopic boom, consisting of one base section and three telescoping sections.
Description Boom length
Fully retracted main boom 10.50 m
Telescopic boom position 15.40 m
Telescopic boom position 20.30 m
Telescopic boom position 25.20 m
Telescopic boom position 30.10 m
Telescopic boom position 32.60 m
Maximum extended main boom 35.00 m

The different telescopic boom configurations allow flexible lifting operations at various working heights and radii.

Optional folding jib: 9.50 metres, if fitted. With this extension, a maximum lifting height of approximately 44 metres may be achieved.
LOAD CHART – LIFTING CAPACITIES
The following table provides an indicative overview of lifting capacities for the Liebherr LTM 1040-2.1 with 6.5 tonnes of counterweight, depending on working radius and boom length.
Working radius 10.5 m boom 20.3 m boom 35 m boom
3 metres 35.0 t — —
4 metres 29.1 t 20.6 t —
5 metres 23.6 t 21.4 t 8.8 t
6 metres 19.1 t 18.2 t 7.2 t
7 metres 15.0 t 15.0 t 7.0 t
8 metres 12.3 t 11.0 t 6.7 t

Important: These figures are indicative only and do not constitute an approved load chart for this individual crane. Actual lifting capacities depend on counterweight, outrigger c

• All wheel drive
• Automatic
• Cabin
• Central lubrication system
• Power steering
• Spotlight rear
• Spotlight front
• Heater
• Front window
• Rotating beacon
• Central greasing